00000000
GPIO test:
abcde
Built: 11:41:48, Nov 25 2011.
0x94b00080: 00000000
0x90b00024: 00000000
XG22(1) 640x480x32b initialization
PCU 0x28=39cb9b99
=================================
== Welcome To AndesCore Family ==
FW info:
Build@ 11:41:48-Nov 25 2011
== --------------------------- ==
CPU_ID(sr#0) : 0xC0C001F
CORE_ID(sr#5): 0x0
== --------------------------- ==
> CPU Version : N12
> Cache Status: I/D-ON
> HSMP Status: HSMP OFF
> L2 Cache Status: L2 Cache OFF
> FPU Status: FPU ON
=================================
=================================
Clock status:
Core0: 495MHz
Core1: 495MHz
L2CC: 247MHz
DDR2: 247MHz
AHB: 123MHz
APB: 61MHz
PCI: 33MHz
=================================
Booting OS.
mode = 1
Check CF Card
No CF Card !!
Check SD Card
SD Card on Drive C: !!!
File system is resigetered
File system on SD is constructed!
Command Initial
SD QC test pass !!
100.0Uncompressing Linux............................................................................................................................................. done, booting the kernel.
Linux version 2.6.32 (root@ian-laptop) (gcc version 4.4.4 (2011-02-21) ) #21 Wed Feb 22 16:27:33 CST 2012
CPU: Andes N12ID(wb), CPU_VER 0x0c0c001f(id 12, rev 12, cfg 31)
CPU0 Features: mfusr_pc perf1 perf2 fpu 16b string edm lmdma pfm hsmp trace div mac l2c
L1I:32KB/256S/4W/32B
L1D:32KB/256S/4W/32B
L2:256KB/512S/8W/64B
FPU is able to use.
Machine: Andes AG101
ILM:0KB, DLM:16KB
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48768
Kernel command line: root=/dev/ram0 rw mem=192M@0x0 initrd=0x800000,8M console=ttyS0,38400n8 rootfstype=ext2 console=tty init=/bin/busybox init -s user_debug=-1
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 192MB = 192MB total
Memory: 181632KB available (4016K code, 475K data, 132K init)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:202
AMIC config 0 132
FTTMR010 timer 1 installed on IRQ 19, with clock 61875000 at 100 HZ.
Console: colour dummy device 80x25
console [tty0] enabled
console [ttyS0] enabled
Calibrating delay loop... 493.15 BogoMIPS (lpj=2465792)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:08.0: PME# disabled
pci 0000:00:08.1: PME# supported from D0 D1 D2 D3hot
pci 0000:00:08.1: PME# disabled
pci 0000:00:08.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:08.2: PME# disabled
PCI: bus0: Fast back to back transfers disabled
bio: create slab
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource fttmr010_tm1
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (junk in compressed archive); looks like an initrd
free_area: Freeing initrd memory: 8192K
fuse init (API version 7.13)
msgmni has been set to 371
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Console: switching to colour frame buffer device 100x37
[xgifb] /dev/fb0: XGI frame buffer device created.
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x94200000 (irq = 10) is a 16550A
serial8250: ttyS1 at MMIO 0x94600000 (irq = 11) is a 16550A
brd: module loaded
loop: module loaded
SD: make node with 'mknod /dev/cpesd b 254 0'
Faraday SD controller Driver (DMA mode)
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
Faraday FTIDE020_S driver version 1.0.1
ide0 at 0x1000-0x1700,0xe00 on irq 1
Loading ftgmac100: version 0.2 ...
ftgmac100_mdio: probed
net eth0: irq 25, mapped at d0802000
net eth0: generated random MAC address a0:a1:a2:a3:a4:a5.
rtusb init --->
usbcore: registered new interface driver rt2870
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
PCI: enabling device 0000:00:08.2 (0140 -> 0142)
ehci_hcd 0000:00:08.2: EHCI Host Controller
ehci_hcd 0000:00:08.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:08.2: irq 178, io mem 0xa0002000
ehci_hcd 0000:00:08.2: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
PCI: enabling device 0000:00:08.0 (0140 -> 0142)
ohci_hcd 0000:00:08.0: OHCI Host Controller
ohci_hcd 0000:00:08.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:08.0: irq 176, io mem 0xa0000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
PCI: enabling device 0000:00:08.1 (0140 -> 0142)
ohci_hcd 0000:00:08.1: OHCI Host Controller
ohci_hcd 0000:00:08.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:08.1: irq 177, io mem 0xa0001000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
serio: i8042 KBD port at 0xf9010180,0xf9010190 irq 181
serio: i8042 AUX port at 0xf9010180,0xf9010190 irq 192
mice: PS/2 mouse device common for all mice
faraday-rtc faraday-rtc.0: rtc core: registered faraday-rtc as rtc0
##### : Faraday I2C Adapter driver Initialized
atkbd.c: keyboard reset failed on onboard/serio0
@@@@@ : request irq ok
@@@@@ : i2c: Faraday I2C adapter
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.21.
>>>>>>>>>> (1) ftssp_alsa_i2c_i2s_init().
>>>>>>>>> (4) ftssp_alsa_init().
##### ftssp_ac97_init
ftssp010 card registered!
ALSA device list:
#0: ftssp_ac97 controller
oprofile: using nds32 performance monitoring.
atkbd.c: keyboard reset failed on onboard/serio1
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
PM driver init
@@@@@ : andes_pcu_major = 0x000000fd
pm_init
faraday-rtc faraday-rtc.0: setting system clock to 1970-01-01 00:00:12 UTC (12)
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 8192KiB [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem) on device 1:0.
free_area: Freeing init memory: 132K
Wed Sep 30 08:00:00 CST 2009
/ #
沒有留言:
張貼留言